---
title: "How to: Extend a partition"
slug: "how-to-extend-a-partition"
updated: 2026-07-01T04:23:08Z
published: 2026-07-01T04:23:08Z
canonical: "docs.serversaustralia.com.au/how-to-extend-a-partition"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.serversaustralia.com.au/llms.txt
> Use this file to discover all available pages before exploring further.

# How to: Extend a partition

Below is a guide written to assist in extending a cloud drive after an upgrade has been processed: In the below example we have upgraded a cloud server from 150GB of storage to 250GB of storage

## Check the current configuration

We can see the old space is still currently reflected by running **lsblk**:

```shell
[root@server ~]# lsblk
NAME            MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda               8:0    0   150G  0 disk
├─sda1            8:1    0     1G  0 part /boot
└─sda2            8:2    0   149G  0 part
  ├─centos-root 253:0    0 145.8G  0 lvm  /
  └─centos-swap 253:1    0   3.2G  0 lvm  [SWAP]
sr0              11:0    1  1024M  0 rom
loop0             7:0    0     4G  0 loop /var/tmp
```

## Rescan the disk that has been resized

We can rescan sda to get the system to recognize the new storage space using the following command:

```shell
echo 1>/sys/class/block/sda/device/rescan
```

> [!WARNING]
> Please Note
> 
> *In the above rescan you need to have the correct block device e.g. sda, sdb, etc, depending on which drive you’ve expanded.*

After running the above command we can see the new drive space is reflected correctly when running **lsblk**:

```shell
[root@server ~]# lsblk
NAME            MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda               8:0    0   250G  0 disk
├─sda1            8:1    0     1G  0 part /boot
└─sda2            8:2    0   149G  0 part
  ├─centos-root 253:0    0 145.8G  0 lvm  /
  └─centos-swap 253:1    0   3.2G  0 lvm  [SWAP]
sr0              11:0    1  1024M  0 rom
loop0             7:0    0     4G  0 loop /var/tmp
```

Once the O.S. can see the correct disk size, we can resize the root partition using **parted**.

## Use parted to resize the required partition

Run the **parted** program and then use the **print** command to see the current state of the partitions.

```shell
[root@server ~]# parted
GNU Parted 3.1
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.

(parted) print
Model: VMware Virtual disk (scsi)
Disk /dev/sda: 268GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End     Size    Type     File system  Flags
 1      1049kB  1075MB  1074MB  primary  xfs          boot
 2      1075MB  161GB   160GB   primary               lvm
```

*You can see under the ‘flags’ column that it has the lvm tag which tells us that it’s not a swap or boot partition. This is important to help identify the correct partition to resize. You’ll also want to make sure that it’s the last partition in the list as you cannot resize any partition that has another partition after it.*

In this example we will need to resize partition number 2 using **resizepart**.

```shell
(parted) resizepart
Partition number? 2
End?  [161GB]? 268GB

(parted) print
Model: VMware Virtual disk (scsi)
Disk /dev/sda: 268GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End     Size    Type     File system  Flags
 1      1049kB  1075MB  1074MB  primary  xfs          boot
 2      1075MB  268GB   267GB   primary               lvm
```

*In this example, we have used* ***resizepart*** *and then entered the maximum size of the disk shown in the* ***print*** *command we used previously. (****268GB****). You can see that the ‘size’ column now says* ***267GB****.* Now type **quit** to exit parted.

## Check the results

Once that is done you can double check that the partition has resized correctly using **lsblk**:

```shell
[root@server ~]# lsblk
NAME            MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda               8:0    0   250G  0 disk
├─sda1            8:1    0     1G  0 part /boot
└─sda2            8:2    0 248.6G  0 part
  ├─centos-root 253:0    0 145.8G  0 lvm  /
  └─centos-swap 253:1    0   3.2G  0 lvm  [SWAP]
sr0              11:0    1  1024M  0 rom
loop0             7:0    0     4G  0 loop /var/tmp
```

*You can now see sda2 is showing the correct size of* ***248.6G*** *and we have successfully expanded this partition.*

Simply expanding a physical partition is usually not the end goal. You’ll generally want to expand the LVM (pv, and lv of the primary volume group), and then expand the filesystem to make the space usable. These steps are covered in the following guide:

[How to expand an LVM (Logical Volume Manager)](https://docs.serversaustralia.com.au/v1/docs/how-to-expand-an-lvm-logical-volume-manager)